deleted by creator

Based on the content of the linked post and the evolution of the thread here, the mod team has decided to lock this post. There is an important difference between standing up for people who are marginalized and harassment, which this thread has been more or less equating. Please deal with this topic in a more nuanced manner going forward.

This looks to just be promoting a product via linking to it on Tumblr. I will be removing this post.

Hey, even if the above is a bad faith argument, this is not a constructive or nice way to bring that up in conversation. Please try to do a better job of communicating going forward. Thanks!

I am not an expert and just cobbled this together based on a couple of searches but my guess would be that the adapter is supported by your current kernel drivers but not as well as whatever drivers Windows 10 was able to fetch. It looks to me like MX uses Debian Stable sources, so you may be able to update your kernel beyond what is normally available and see if that helps. If that doesn’t work, based on this post and this post on the TP-Link forums, there’s a github repo that you may be able to install a better driver from. To my eyes there’s fairly good instructions there, including the potential need to disable the driver you’re already using in favor of the new one once you build it.

Hi! This is a good post, however we don’t typically allow copying and pasting the full article content into the body of the post. I’m going to remove this post, but please feel free to repost it with just a link and a summary. Thanks!

Hi! This submission is not well suited for the World News community. Depending on the type of discussion you were going to have, it would probably be better suited for our Humanities and Cultures community or our Socialism community. I am going to remove the post here, but please consider resubmitting to one of those communities. Thanks!

I bought a used HP Elitebook on eBay for a similar purpose. I can browse and do video calls on a bigger screen when the fancy strikes. Pretty much any used business laptop should work. I think I paid about $300 for mine and I paid extra for particular hardware I thought was neat but you don’t have to. Only thing to keep in mind is the battery will likely be pretty worn.

Hey y’all! This thread has sparked a lot of discussion and it is obviously a very tense topic being discussed at a tense time in the world. With the way the thread has been going, the mod team doesn’t feel we can moderate this thread thoroughly enough to make it follow our rules, so I am going to lock it.

Other than the two attempts at caramel making I did not accomplish anything else, but I am still pretty pleased with that. I had a lot of other things going on, and making something was good. I may try another batch this weekend in hopes that I can get the last refinement in before the holidays. Overall, I enjoyed running and participating in the event, and I am looking forward to next year!

Unfortunately I haven’t been able to make any more caramel, and based on what’s going on life wise I’m not going to have a chance to before the end of the month. I’m still happy that I was able to make a few attempts and make some progress though!

I retried my recipe as a dry caramel and got improved results! I got a good color, as you can see in this picture. I think I got a little impatient and turned the heat up too high, because it was a bit burnt, although that might also have been because I forgot to prep my pan to pour into until it was almost done. The fats also went in later and were much better incorporated. I’m hoping to get one more attempt before the end of the month and have something I will feel good about making for the holidays.

Hey, this comment reads like you’re just dunking on another user. If that is not what you meant to do, please try to communicate more clearly, and if that is what you meant to do, please refrain while commenting on Beehaw in order to be(e) nice. Thanks!

Not sure what you are talking about with the sockpuppets bit, but please try to be polite when someone confuses you for another user in the thread. It’s a simple mistake and there’s no need to be mean about it. Thanks!

I haven’t gotten to make more caramel, but I did eat my last batch. Definitely the right chew, but so pale it looked like raw chicken, and the fat didn’t emulsify so it was, as my SO immediately described it, “gweasy.” Picture: https://postimg.cc/qtY5kV6g

Recipe was as follows:

• 192g sugar
• 65 ml canned coconut cream
• 28g vegan butter
• Salt and vanilla to taste

1. Put sugar in a pot with just enough water to fully wet it, along with the coconut cream
2. Heat over medium heat to firm ball temperature
3. Remove from heat, add butter, salt, and vanilla.
4. Pour into pan lined with parchment paper

I’m going to try again with the same ingredients but try melting the sugar dry, then adding the coconut cream. That would at least help with the color of nothing else. Failing that, I have another recipe I can try that uses corn syrup and brown sugar along with sweetened condensed coconut milk.—

I did manage to spend a bit of time today making caramel. I followed a recipe I had written down on a sticky note last time I tried this. Currently it is chilling in the fridge to be cut tomorrow. The bit that I scraped out of the pot after definitely has the right texture, stuck to my teeth and very chewy. That said, it didn’t really get a caramel color, I’ll try to take a picture and add it here along with the recipe, but it stayed almost white even though it reached firm ball temp. I have another recipe that I tried before, so I might go to that and maybe use it as a starting point for experimentation if I can get better color out of it.

A little late to my own party because of a business trip, but I think I’m going to work on refining my dairy free caramel skills. I should have photos of a few batches of caramel throughout the month.

If you’re willing to roll your own a bit, whisper.cpp is pretty good

Digital is just fine! In the past for a make something month I did a website, so a 3d model would be perfect

I was not terribly successful on this last year so I have two ideas, both aiming to scale back a bit:

1. Complete my project from last year, which was a round shield inspired by Viking round shields
2. Hammer out a good dairy free caramel recipe. I already have a dairy free fudge recipe which I make at Christmas every year. There’s also caramels, but my SO has a dairy allergy so she cannot partake, so I would like to work out a good caramel recipe. I have made previous attempts at this, but they all fell victim to various mishaps, ranging from becoming overcooked into burnt hard candy to having a fly nosedive into the cooking caramel

This will be made a little more complicated by having a week of business travel as well as a family visit at the end of the month, but I am hoping to accomplish something fun without setting too high of expectations for myself.