“never plug extension cords into extension cords” is probably the most common piece of electrical related advice I’ve ever heard. But if you have, say, 2 x 2m long extension cords, and you plug one into the other, why is that considered a lot more unsafe than just using a single 4 or 5 meter cord?
Does it just boil down to that extra connection creating another opportunity for the prongs to slip out and cause a spark or short circuit? Or is there something else happening there?
For that matter - why aren’t super long extension cords (50 or more meters) considered unsafe? Does that also just come down to a matter of only having 2 connections versus 4 or more on a daisy chained cord?
Followup stupid question: is whatever causes piggybacked extension cords to be considered unsafe actually that dangerous, or is it the sort of thing that gets parroted around and misconstrued/blown out of proportion? On a scale from “smoking 20 packs of cigarettes a day” to “stubbing your toe on a really heavy piece of furniture”, how dangerous would you subjectively rate daisy chaining extension cords, assuming it was only 1 hop (2 extension cords, no more), and was kept under 5 or 10 metres?
I’m sure there’s probably somebody bashing their head against a wall at these questions, but I’m not trying to be ignorant, I’m just curious. Thank you for tolerating my stupid questions
I don’t think what they said is actually a problem, it’s just a back-justification for the original trope. Daisy chaining them and strictly sticking to only the few appliances that would fit in one extension strip is fine. But that’s complicated to explain, it’s better to just tell people not to do it rather than expect them to understand what’s going on
A couple things that can happen…
plugging in too many appliances over several daisy chained power strips trips the circuit breaker because too much current is being drawn
if the country you live in has lax electrical safety standards then, yes, perhaps you can overload the daisy chain without tripping the main circuit which would lead to overheating
When the breaker trips then the fundamental issue is unlikely to be present. But to be able to push enough current to cause it to break the connection needs to have a sufficiently low resistance. If that gets too high it will never break, even if you short the cables. And that will result in a fire, because the protection does not work anymore. That is the dangerous part.